1.
Remove the two fixing screws at either side, to gain
access to them you will have to turn the steering to the
opposite side of the car you are working on.
2.
Remove the sidelight fixing screw, and swing out the
indicator. It is fitted with a tab at the other side
that hooks into the bumper.
3.
Unplug the connector from the bulb holder.
4.
You can now see the main mounting bracket, and 12mm
fixing bolts - remove both of these. Also remove the
three 10mm bolts that hold the bottom of the bumper to
the chassis, just before the front cross member (picture
to follow).
5. You can now pull the sides of the
bumper past the plastic brackets, and the whole
bumper should lift up and off the body - the
bumper hooks onto the car at the mounting
brackets.