OBD-0 VTEC to OBD-1
Converting a PW0/PR3 PGM-Fi system to OBD-1.
Introduction
This guide details swapping an OBD-0 VTEC system such as a PW0 or PR3 ECU for a P30. The exact process with vary depending on your setup, in this case we are converting a PW0 system to P30.
Parts Required
- OBD-1 Distributor & Connectors (or adapter loom)
- OBD-1 ECU & Conenctors (or adapter loom)
- Heated Oxygen Sensor