|
1. Remove the two screws
from the top cover. |
|
2. We must first remove
the CD mechanism. |
|
3. Remove the two screws
at the front of the CD mechanism. |
|
4. Lift out the CD
mechanism and sit it on the rear of the unit. |
|
5. With a small
screwdriver slide out the two locking lugs on the CD's
ribbon connector and the cable should fall out. Put
the CD mechanism to one side. |
|
6. A view with the CD
mechanism removed. |
|
7. Remove the two screws
behind the front panel. |
|
8. Remove the small
screw at the top of the front panel on each
side. |
|
9. Release the lugs on
the front panel connector. |
|
10. Lift up the rear of
the ribbon cable and slide it out from the
connector. |
|
11. Note the red
connector to the right side of the panel
assembly. |
|
12. The front panel
assembly can now be lifted up and removed. |